Daewoo DHR-9105P DVD Recorder User Manual


 
Auto :
Convert to the appropriate aspect ratio
automatically.
TV Aspect Ratio
1
Use [/] to select ‘TV Aspect‘ while the
‘Video‘ submenu is displayed.
2
Press [ENTER] or [] to go to the second level.
3
Use [/] to select the desired ‘TV Aspect’.
4
Press [ENTER] to confirm your selection.
5
Press [SETUP] to exit the menu.
4:3 LB :
Select when a standard 4:3 TV is
connected. Displays theatrical images with masking
bars above and below the picture.
4:3 PS :
Select when a standard 4:3 TV is
connected. Displays pictures cropped to fill your TV
screen. Both sides of the picture are cut off.
16:9 :
Select when a 16:9 wide screen TV is
connected.
Video Output
Progressive Scan Video provides the highest picture
quality with reduced flickering.
RGB :
If you connect the HDD/DVD Recorder to an
analog television using the SCART jacks, set Video
Output to ‘RGB’.
Interlace or Progressive :
If you connect the
HDD/DVD Recorder to a digital television (DTV) or
Monitor using the COMPONENT jacks, set Video
Output to ‘Interlace’ or ‘Progressive’.
Follow the same procedure as ‘TV Aspect Ratio’ to
change the ‘Video Output’.
Caution
Once the Progressive Scan setting is entered,
an image will only be visible on a Progressive
Scan compatible TV or monitor. Press and
hold [P.SCAN] for 5 seconds to return to
Interlace Scan mode.
Video
TV Aspect Auto
Video Output Interlace
Instructions:
Enter-Confirm Setup-Exit Move …†
Select Picture
Format
4:3 LB
4:3 PS
16:9
Auto
Video
TV Aspect Auto
Video Output Interlace
Instructions:
Enter-Confirm Setup-Exit Move …†
Select Video
Output
Interlace
Progressive
RGB
1
Press [SETUP].
2
Use [œ/] to select ‘Preferences‘.
3
While ‘Preferences‘ is selected, press [] to
select ‘Video‘.
4
Press [ENTER]. The ‘Video‘ submenu is
displayed.
PREFERENCES / Video Settings
Preferences
Video
Audio
Parental Controls
Auto Settings
Hard Disk
Instructions:
Enter-Confirm Setup-Exit
Move
…†
24
Setup menu
DG-M32D1P-2A(GB) 2006.5.16 4:40 PM ˘ ` 24 mac001 1200DPI 100LPI