Filter
Top Products
23
Menu Operation
Picture Control
1. Press the MENU button to call up the menu.
2. Move the selection bar to the Picture menu
with the ▼PR▲ buttons.
3. Press the VOL► button.
4. Select the item to adjust with the ▼PR▲
buttons.
5. Press the ◄VOL► buttons.
The level adjust mode of each function appears :
“Brightness”, “Contrast”, “Colour”, “Sharpness”, “Tint”.
You can adjust the level of each item by using the
◄VOL► buttons.
NOTE:
Tint is displayed only when receiving a NTSC
signal. The adjusted levels are stored
automatically in Favourite mode.
NOTE:
You cannot adjust the colour saturation in PC and
DVI mode.
This is PRE-SET to the correct level by the system.
Smart Picture mode Selection
1. Select Mode from the Picture menu.
2. Using◄VOL► buttons, Select the desired
mode.
Four pictures settings;
Standard > Dynamic > Cinema > Favourite
Note :
When you press the Picture button on the remote
controller repeatedly, you can call up four
pictures settings.
Standard: For a highly defined image in a
normally bright room
Dynamic: For a clear-cut image emphasizing
high contrast for sports viewing
Cinema: Ideal for movies
Favourite: Allows the user to customize settings
as desired.
CH
Picture
Sound
Screen
Install
Features
Move Select Menu:Save
Mode Standard
Brightness 48
Contrast 63
Colour 50
Sharpness 50
Tint 0