Filter
Top Products
46
Recording to DVD or HDD
If you press [DVD/HDD], you will be in DVD or HDD
record mode.
You can record to DVD or HDD by pressing the [REC]
button. (The unit must have a recordable media in
the DVD tray when in DVD mode.)
1 Turn on the DVB-T HDD/DVD Recorder and load a
recordable disc .
Make sure your TV input is set to view the
DVB-T HDD/DVD Recorder.
Select the media to record by pressing
[DVD/HDD] on the remote control.
2 Set the desired Recording
mode by pressing [REC
MODE] repeatedly.
Available disc space will be
displayed according to the
recording quality. For
detailed information
regarding setting Recording
Quality refer to page 27.
3 Set the desired Recording
source by pressing [INPUT] or
[CH +/CH -].
You can select which video
input you want to record from the following
options.
- TV, AV1, AV2, AVF, S-VIDEO Input or DV Input.
4 Press [REC (●)] once.
Recording will start. The REC indicator lights on
the front panel display.
Recording continues until you press [STOP] or
the disc is full.
To record for a fixed length of time, see One
Touch Record opposite.
5 Press [STOP (■)] to stop recording and the
following OSD shows shortly and the recording
will stop.
• The maximum number of DVD titles per disc is
49. If the DVB-T HDD/DVD Recorder is
powered off during DVD recording, the
recording will not be saved.
• If a DVD+RW or unfinalised DVD±R, DVD-RW
disc is inserted in the tray, no title is played
automatically after loading is finished.
• If you are recording to a blank DVD±R (±RW)
disc, it may take up to 7 minutes (it depends on
the disc) for post processing after recording.
HDD Mode
HDD record quality SLP
HDD
Free: 175hr., 43mins.
One Touch Recording allows you to add recording
time in fixed increments at the touch of a button.
1 Follow steps 1-3 under Recording to DVD or HDD.
2 Press [REC (●)] repeatedly to set the length of the
recording.
Recording starts after the first press. Each
subsequent press increases the recording time
by 15 minutes within the available space
(DVD). The recording time is displayed on the
front display panel.
One Touch Record (OTR)
Basic Recording
Basic Recording
1
Press [PLAY/PAUSE] to pause the disc during
recording.
2
To continue recording, press [PLAY/PAUSE] or
[REC (
●)].
To Pause the Recording
• To quit One Touch Recording, press [Stop] and
press [RED].
• The DVB-T HDD/DVD Recorder will
automatically power off when One Touch
Recording ends.
DVD Mode
DVD record quality HQ
-RW
Free: 0hr., 43mins.
0202DRHT-630 2007.2.2 9:19 AM ˘ `46