Select the Effect Mode.
• Select [Effect] by pressing the “ CH ” buttons, then
select ON/OFF by pressing the “ VOL
”
button.
• [Effect]: Used to emphasize stereo effect.
Select the Sound Mode.
4
5
57
• Select the Sound Mode by pressing the “ CH ” button,
then adjust it by pressing the “ VOL
”
button.
* Normal : Suitable for watching any motion picture
* Movie : Select this mode to simulate being at a movie
theater
* Music : Suitable for listening to music
* News : Allows human voice to be heard more clearly
* User : Allows the user to adjust as desired.
NOTES:
1) User Mode : Used as an Equalizer with which the user can adjust the sound frequency as desired.
2) If you modify the sound frequency in auto Sound Mode (News, Movie, Music, etc.), it is automatically switched to the User Mode.
3) For the realistic sound effect, lower than 120Hz frequency sound and greater than 10kHz frequency sound are emphasized.
4) If you make connection to the Left Audio Input as input is MONO you can hear from both speakers.
5) AVC function : This function adjusts volume to the set level automatically. However, depend on the sources, it may have different
volume level because the sound sources have their own initially set up levels.
6) MTS function can control the sound output according to the current state of sound.
Pressing “DISPLAY” button displays current state of sound in the OSD located upper right comer of the screen.
