Filter
Top Products
12
Connecting your player to the Hi-Fi system
Option 1
■ Before you start, unplug all the equipment from the mains supply.
Television
Plug a phono cable into the
“Audio L/R” sockets on the
back panel and into the audio
sockets on any audio
amplifier, if needed. If your
player does not have this
connection, see page 14.
Player
230V~,
50/60 Hz
You can also use a scart lead to improve picture and sound quality from your player.
Hi-Fi
Aerial
Option 2
Television
Plug a scart to phono cable into
the “AV1” socket on the back
panel and into the audio socket
on any audio amplifier, if
needed.
Player
230V~,
50/60 Hz
Hi-Fi
Aerial
Installation
13
How to connect
How to connect your player to another player
■ Before you start, unplug all the equipment from the mains supply.
First player
Second player
230V~,
50/60 Hz
1) Insert the tape you wish to record on into the first player and press [OUTPUT] until “AV1” appears on the
front display.
2) Insert the tape you wish to copy from into the second player. Press the [PLAY] button on the second player.
3) Press the [RECORD] button on the first player.
The player will start recording.
If your player has two scart sockets, you can use the other socket “AV2” to connect other equipment.
To use this function, see page 15.
How to connect your player to a camcorder
How to connect
■ Before you start, unplug all the equipment from the mains supply.
If you have connected your camcorder in this way, you can also connect a scart lead from “AV2” on the
back panel of the player to the television. To use this function, see page 15.
You can also connect the camcorder by using a phono cable if your player has front input sockets.
Check the front of your player for this connection, see page 15.
Camcorder
Aerial
230V~,
50/60 Hz
Television
Player
to
camcorder
Scart Plug
to TV