Filter
Top Products
14
Connections
ENGLISH
Connections
ENGLISH
Introduction Connections Playback Function Setup Others
Analog 7.1ch/5.1ch audio signals can be output from 7.1ch AUDIO OUT jacks.
• You can use a disc which offers BD-Live function by connecting the unit to the Internet.
(For BD-Live information, please refer to page 28.)
Connection to a Device with 2-channels of Analog Audio Inputs
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Note
• When connecting to a 2-channel audio stereo device, use the 2ch AUDIO OUT jacks. If the 7.1ch
AUDIO OUT jacks are used, set “7.1ch Audio Out” in the “Audio” menu to “2 Channel” (Refer to
page 33). For software recorded in multi-channel, analog signals that have been down-mixed
into 2 channels are output. (For sources which are prohibited from down-mixing, only the FL/FR
signals are output.)
Surround Connections to a Device with 7.1/5.1-channels of Analog Audio Inputs
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.
HDMI OUT
ETHERNET
AC IN
COAXIAL
COMPONENT VIDEO OUT VIDEO OUT
DIGITAL OUT
( PCM / BITSTREAM )
ROOM TO ROOM
REMOTE CONTROL
RS-232C
STRAIGHT CABLE
2ch AUDIO OUT
L
SBR
FR
SW
7.1ch AUDIO OUT
C
FL SL SBL
SR
R
2ch AUDIO OUT
LR
R
L
AUDIO IN
audio
this unit
RCA audio cable
Stereo component
CENTER
SUB-
WOOFER
R
SURROUND
L
R
SURROUND
BACK
L
R
L
ROOM
O
NTROL
E
2ch AUDIO OUT
L
SBR
FR
SW
7.1ch AUDIO OUT
C
FL SL SBL
SR
R
FRONT
AV amplifier
audio
this unit
Note
• If you connect to 5.1-channel surround system, do not connect to SBR/SBL (surround back R/L)
jacks, then set “Surround Back” in “Speaker Configuration” to “None”.
Network Connection with LAN
No supplied cables are used in this connection:
Please purchase the necessary cables at your local store.
Note
• After connecting to the Internet, set up necessary network settings.
• Do not insert any cable other than a LAN cable to the ETHERNET terminal to avoid damaging the
unit.
• If your telecommunications equipment (modem, etc.) does not have broadband router
functions, connect a broadband router.
• If your telecommunications equipment (modem, etc.) has broadband router functions but there
is no vacant port, use a hub.
• For a broadband router, use a router which supports 10BASE-T/100BASE-TX.
• Do not connect your PC directly to the ETHERNET terminal of this unit.
Telecommunications
equipment (modem, etc.)
HDMI OUT
ETHERNET
AC IN
COAXIAL
COMPONENT VIDEO OUT
VIDEO OUT
DIGITAL OUT
( PCM / BITSTREAM )
ROOM TO ROOM
REMOTE CONTROL
RS-232C
STRAIGHT CABLE
2ch AUDIO OUT
L
SBR
FR
SW
7.1ch AUDIO OUT
C
FL SL SBL
SR
R
LAN
WAN LAN
12345
ETHERNET
Teleco mm uni cations
equipment (modem, etc.)
Hub or broadband router
LAN cable
LAN cable
this unit
Internet
E5KA0UD_EN.book Page 14 Tuesday, April 28, 2009 11:15 AM