Filter
Top Products
31
Function Setup Function Setup
ENGLISH
ENGLISH
Introduction Connections Playback Function Setup Others
Setting items Options
HDMI RGB Setting
Sets the digital RGB image range
(data range) output from the HDMI
OUT.
Normal*:
Output as “16 (black)” to “235 (white)”.
Enhanced:
Output as “0 (black)” to “255 (white)”.
Depending on the display device you are using, the
black colors may seem to stand out when using HDMI
connections. If so, set to “Enhanced”.
HDMI Auto Format
Makes the setting of the “Auto” for
“HDMI Video Resolution”.
Max*:
The maximum resolution that can be input to the
connected HDMI device is detected and the HDMI
output resolution is selected automatically.
Panel:
The number of pixels of the connected HDMI device’s
panel is detected and the HDMI output resolution is
selected automatically.
HDMI Video Resolution
Sets the HDMI video resolution.
Auto*:
HDMI video resolution will be selected automatically
depending on the connected HDMI device and setting
of the “HDMI Auto Format”.
Source Direct:
HDMI video resolution will be set to the recorded
resolution of a playback media.
480i
480p
720p
1080i
1080p
1080p24:
Gives a natural and high quality film reproduction of 24-
frame film material. The connected display device has to
be compatible with 1080p24 frame input.
HDMI Deep Color
Sets whether output the picture
from HDMI with the Deep Color or
not.
Auto*:
The picture through the HDMI will be output with Deep
Color if the connecting device supports Deep Color.
Off:
The picture through the HDMI will be output without
Deep Color.
Component Output
Sets the video resolution for
component output.
480i*
480p
720p
1080i
Setting items Options
Progressive Mode
Sets the optimum progressive
mode for the image material
output from HDMI OUT jack and
COMPONENT VIDEO OUT jacks.
Auto*:
The progressive mode will be selected automatically
depending on the material type (film or video).
Video1:
Suited for playing video material discs.
Video2:
Suited for playing video material discs and 30-frame film
material discs.
Audio/Video Sync
Sets which video signal to
synchronize the audio signal with.
HDMI*:
Synchronizes the audio with the video signal from HDMI
OUT.
Progressive:
Synchronizes the audio with the progressive video
signal from COMPONENT VIDEO OUT.
Interlace:
Synchronizes the audio with the Interlace video signal
from COMPONENT VIDEO OUT (480i) or VIDEO OUT.
Other:
Select this when you want to view progressive,
interlaced and HDMI pictures simultaneously. The audio
signals are set to the optimum timing for the respective
pictures. (They are not synchronized.)
Still Mode
Adjusts picture resolution and
quality in still mode.
Auto*:
Automatically selects the best resolution setting
(“Frame” or “Field”) based on the data characteristics of
the pictures.
Field:
Stabilizes the pictures, although the picture quality may
become coarse due to the limited amount of data.
Select “Field” when the pictures are still unstable even if
“Auto” is selected.
Frame:
Displays relatively motionless pictures in higher
resolution. “Frame” improves the picture quality,
although it may unstabilize the pictures due to alternate
output of 2-field data.
TV Active Area
Sets the horizontal display area for
interlace (480i) output.
Normal:
Select this if the image is not stable with connecting to
professional-use display.
Full*:
Select this for connecting to commonly-marketed
display.
Remote control operation
buttons
:
Displaying the menu
Cancel the menu
:
Move the cursor
(Up/Down/Left/Right)
: Confirm the setting : Return to previous menu
E5KA0UD_EN.book Page 31 Tuesday, April 28, 2009 11:15 AM