Filter
Top Products
30
ENGLISH
3
w
When “HDMI AUDIO SETUP” is selected:
2CH (Channel) (Factory default)
The audio signals are output from the HDMI terminal with a down-
mixed to 2 channel.
MULTI(NORMAL)
The multi-channel audio signals are output from the HDMI terminal
with a bit-stream.
MULTI(LPCM)
The multi-channel audio signals are output from the HDMI terminal
with a linear PCM.
B
When “MULTI (LPCM)” is selected, use the
•
and
ª
cursor
buttons to select the item to be set, then press the ENTER
button.
SPEAKER CONFIGURATION
Use this to select the types of the different speakers.
CHANNEL LEVEL
Use this to adjust the output level of the different speakers.
DELAY TIME
Use this to set the distance from the different speakers to the
listening position.
✽
To exit the HDMI SPEAKER SETUP mode.
Use the
ª
cursor button to select “DIGITAL INTERFACE SETUP”
then press ENTER button.
B
When “SPEAKER CONFIGURATION” is selected, use the
•
and
ª
cursor buttons to select the speaker to be set then press the
ENTER button.
•
The type of speaker used for the front speakers, center speaker,
subwoofer and surround speakers can be set. Use the • and ª cursor
buttons to select the speaker type, then press the ENTER button.
LARGE
Select this when a large speaker is connected.
SMALL
Select this when a small speaker is connected.
NONE
Select this when no speaker is connected.
YES
Select this when a subwoofer is connected.
NO
Select this when no subwoofer is connected.
✽
Press the RETURN button to return to the “HDMI SPEAKER
SETUP” menu.
B
When “CHANNEL LEVEL” is selected, use the
•
and
ª
cursor
buttons to select the speaker to be adjusted, then use the
0
and
1
cursor buttons to set the level.
TEST TONE
• Use the
0 and 1 cursor buttons to select auto or manual.
Adjust so that the volume of the test tones output from the different
speakers sounds the same.
• The volume level output from the front speakers (left and right
channels), center speaker, surround speakers (left and right
channels) and subwoofer can be adjusted.
• The volume level can be adjusted between 0 and -10 dB in steps of
1 dB.
✽
Press the RETURN button to return to the “HDMI SPEAKER
SETUP” menu.
DECISION:ENTER BUTTONSELECT :
DIGITAL INTERFACE SETUP
EXIT SETUP
HDMI/DVI BLACK LEVEL
2CH
MULTI(NORMAL)
MULTI(LPCM)
HDMI AUDIO SETUP
HDMI SPEAKER SETUP
SPEAKER CONFIGURAT ION
CHANNEL LEVEL
DELAY TI
M
E
DIGITAL INTERFACE SETUP
DECISION:ENTER BUTTONSELECT :
HDMI SPEAKER SETUP
SPEAKER CONF IGURAT ION
FRONT SP
CENTER SP
SUB
W
OOFER
SURROUND SP
LARGE
LARGE
YES
LARGE
DECISION:ENTER BUTTON
SELECT :
HDMI SPEAKER SETUP
CHANNEL LEVEL
DECISION:ENTER BUTTONSELECT :
TEST TONE
FRONT LCH
CENTER
FRONT RCH
SURROUND RCH
SURROUND LCH
SUB
W
OOFER
OFF
0dB
0dB
0dB
0dB
0dB
0dB
Remote control unit Remote control unit
The display depends on the connected device.
(Indicates whether or not speakers are
connected)