Press the PURE DIRECT SELECT button on the main
unit.
The modes described below will appear on the display.
NORMAL : All signals are output normally.
MODE 1 : The settings stored for MODE 1 are used.
The factory default settings are:
“DIGITAL OUT”: “ON”
“VIDEO OUT”: “ON”
“DISPLAY”: “ON”
MODE 2 : The settings stored for MODE 2 are used.
The factory default settings are:
“DIGITAL OUT”: “ON”
“VIDEO OUT”: “ON”
“DISPLAY”: “ON”
ALL OFF : No indicate in Display of the main unit,
video and digital signals are not out.(except
analog audio output)
10
USING THE SUPER AUDIO CD SETUP
2 On a Super Audio CD, the stereo and multi – channel areas are separate.
Hybrid discs comprise 2-layer structure of Super Audio CD layer and a CD layer.
The area/layer can be set to be played with priority.
1
Press the SUPER AUDIO CD SETUP button.
• The modes described below will appear on the display.
MULTI (Factory default)
When playing a Super Audio CD disc, the multi –
channel area will be played back with priority.
STEREO
When playing a Super Audio CD disc, the stereo area
will be played back with priority.
CD
When playing a Super Audio CD disc, the CD layer will
be played back with priority.
✽
When playing back a disc that does not have a
selected area/layer, another area/layer will be played
back automatically.
Main unit
