Filter
Top Products
20
ENGLISH
3
B
When “DELAY TIME” is selected:
With 5.1-channel surround sound, ideally the distance
between the listening position and all the speakers
aside from the subwoofer should be the same. The
delay time setting can be used to make the sound
from the different speakers reach the listening position
at the same time.
Use the
•
and
ª
cursor buttons to select the setting
item, then press the ENTER button.
• When “DISTANCE” is selected:
METERS (when the
0
cursor button is pressed):
The unit of distance is set to meters (“m”).
FEET (when the
1
cursor button is pressed):
The unit of distance is set to feet (“ft”).
• When “FRONT Lch”, “FRONT Rch”, “CENTER”,
“SURROUND Lch”, ”SURROUND Rch”,
“SUBWOOFER” is selected:
Use the
0
and
1
cursor buttons to set the distance
from the listening position to the different speakers.
✽
The distance can be set within the range of 0 to
18 meters (60 feet).
✽
The maximum difference in speaker distance for
which adjustment is possible is 7.5 meters (25
feet).
• When “DEFAULT” is selected:
When “DEFAULT” is selected and the ENTER button
is pressed, all the items are restored to their factory
default settings.
✽
When digital connections are made with an AV amplifier,
make the speaker settings on the AV amplifier.
For DVD audio discs, the disc’s settings are given
priority, so the sound may not be produced as set with
the above speaker mode setting.
✽
Press the RETURN button to return to the “SPEAKER
SETUP” menu.
Remote control unit
ENTER
Remote control unit
ENTER
Remote control unit
SPEAKER SETUP
SELECT: DECISION:ENTER BUTTON
DE LAY T I
M
E
D I STANCE
FRONT L ch
CENTER
FRONT Rc h
METERS
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
ON
SURROUND Rch
SURROUND L ch
SUB
W
OOF ER
DEFAULT
SPEAKER SETUP
SELECT: DECISION:ENTER BUTTON
DE LAY T I
M
E
D I STANCE
FRONT L ch
CENTER
FRONT Rc h
ON
SURROUND Rch
SURROUND L ch
SUB
W
OOF ER
DEFAULT
METERS
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
SPEAKER SETUP
SELECT: DECISION:ENTER BUTTON
DE LAY T I
M
E
D I STANCE
FRONT L ch
CENTER
FRONT Rc h
ON
SURROUND Rch
SURROUND L ch
SUB
W
OOF ER
DEFAULT
METERS
3.6 m
3.6 m
3.6 m
3.6 m
3.0 m
3.0 m
3
Remote control unit
ENTER
Remote control unit
AUD IO SETUP
SELECT: DECISION:ENTER BUTTON
AUD IO CHANNEL
DI G I TAL OUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
NORMAL
PCM
IEEE1394
DENON LINK
EXIT SETUP
SOURCE D I RECT
AUD IO SETUP
SELECT: DECISION:ENTER BUTTON
AUD IO CHANNEL
DI G I TAL OUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
IEEE1394
DENON LINK
EXIT SETUP
ON
OFF
SOURCE D I RECT
AUD IO SETUP
SELECT: DECISION:ENTER BUTTON
AUD IO CHANNEL
DI G I TAL OUT
LPCM(44.1kHz/48kHz)
BASS ENHANCER
2nd
OFF
IEEE1394
DENON LINK
EXIT SETUP
SOURCE D I RECT
w When “DIGITAL OUT” is selected:
NORMAL (Factory default)
When playing DVDs recorded in Dolby Digital or DTS,
bitstream signals are output from the digital audio output
terminals. When playing DVDs recorded in linear PCM or
packed PCM, linear PCM signals are output.
Select “NORMAL” when making digital connections to
an AV amplifier with built-in Dolby Digital and DTS
decoder.
PCM
When playing Dolby Digital/DTS bitstream signals or
DVDs recorded in linear PCM or packed PCM, the signals
are converted into 48 kHz/16-bit PCM (2-channel) signals
and output from the digital outputs. When playing DVDs
recorded in PCM, linear PCM signals are output.
e When “LPCM (44.1 kHz/ 48 kHz)” is selected:
OFF (Factory default)
When playing linear PCM or packed PCM DVDs that are
not copyright-protected, for 2-channel PCM audio signals
up to 96 kHz, linear PCM signals are output as such
without being converted from the digital outputs. (176.2
kHz and 192 kHz signals are converted to 88.2 kHz and
96 kHz, respectively.)
For DVDs containing multi-channel PCM signals, the
digital signals are down-mixed for output into two
channels, front left and right. (Only the front left and right
channels are output for sources for which down-mixing is
prohibited.)
When playing copyright-protected linear PCM or packed
PCM DVDs, in consideration of copyrights, no digital
signals are output for sources exceeding 48 kHz/16 bits.
When playing such sources, either set to “ON” or make
analog connections. (See page 9.)
ON
Linear PCM and packed PCM signals are converted to
44.1 kHz or 48 kHz and output. (The PCM digital audio
output signals are converted to 48 kHz or less in
consideration of copyrights.) When making digital
connections to an AV amplifier that is not compatible
with 96 kHz/88.2 kHz signals, set to “ON”.
r When “DENON LINK” is selected:
OFF (Factory default)
Digital audio signals are not output from the DENON
LINK terminal.
2nd
Set this when the amplifier to be connected is DENON
LINK 2nd.