Filter
Top Products
26
ENGLISH
(8) Using the SRS TruSurround function (only for DVD-videos and Video CDs)
During playback, press the SRS TS button on the remote control
unit.
• Press the button again to cancel the TruSurround function.
Remote control unit
SRS.TS
2 The multi-channel sound normally achieved with five speakers is recreated using only the two front stereo
speakers. This results in a sound with a nearly natural sense of movement that seems to surround the head,
without the strong directivity characteristic of multi-speaker systems.
NOTES:
• This function only works with DVD-videos and video CDs only.
• The SRS TS function does not work at the time of multi-channel setting. Set “AUDIO CHANNEL” under
“AUDIO SETUP” at “SETUP” to “2 CHANNEL”.
• Note that for some discs the effect will be weak or there will be no effect.
• Turn off other surround functions (the TV’s surround mode, etc.).
• The SRS TS function only works for analog audio output signals. The digital audio output signals do not
change.
✽ is a trademark of SRS Labs, Inc. TruSurround technology is incorporated under license from SRS
Labs, Inc.
(9) Selecting the still image (only for DVD-audios)
During playback, press the PAGE + or PAGE - button on the
remote control unit.
• For DVD audio discs with still images, the desired image
can be selected.
• On some discs the image cannot be selected due to the
intentions of the discs’ producers.
PAGE
Remote control unit
(10) Playing bonus groups (only for DVD-audios)
In the stop mode, press the SEARCH MODE button on
the remote control unit to set the search mode to
“GROUP”.
1
Use the number buttons to input the bonus group number.
2
4 5 6
1
7
0
2
8
+10
3
9
Remote control unit
SEARCH MODE
Remote control unit
Use the number buttons on the remote control unit to
input the password (4 digits), then press the ENTER
button.
• Playback starts from the first track in the specified group.
3
ENTER
Remote control unit
• In some cases the password must be input at the menu screen. In these cases, follow the instructions on
the screen.
• Once the password is input, the disc can be played as many times as you want until it is removed.
• If you make a mistake when inputting the password, press the CLEAR button on the remote control unit.
1 2
9
8
763
B
SUPER AUDIO CD DVI
OPEN / CLOSE
5
PLAY STOP
STILL / PAUSE
¢ON / STANDBY
£OFF
DVD AUDIO-VIDEO / SUPER AUDIO CD PLAYER DVD-A11
DENON LINK IEEE 1394
AL24 PLUS
REMOTE SENSOR
MODE SELECT
MODE SET UP
PUSH ENTER
21
10
USING THE MODE SET UP
2 High quality audio can be enjoyed by setting the priority ranking of the area/layers of the Super Audio CD that
is to be played back by stopping the output of video signals, etc. and by outputting only the analog audio
signal. The video output setting of the DVI connector can also be changed.
1
Press the mode button.
• The modes described below will appear on the display.
B Super Audio CD
On a Super Audio CD, the stereo and multi-channel
areas are separate. Hybrid discs comprise a 2-layer
structure of a Super Audio CD layer and a CD layer.
The area/layer can be set to be played with priority.
B FILTER
The low pass filter value when playing Super Audio
CDs can be set.
B PURE DIRECT
Circuits other than analog audio circuits are turned off.
B DVI SETUP
Changes the output signal settings of the DVI-D
terminal.
B DVI BK LEVEL
Switches the digital RGB video level (data range) of the
DVI-D terminal.
SuperAudio CD
F
IL
TER
PURE DIRECT
DVI SETUP
D
VI B
KLEVEL
Main unit
(Displays the setting mode)
2
B When “Super Audio CD” is selected:
Turning the select knob will display the following
setting modes on the display.
MULTI (Factory default)
When playing a Super Audio CD disc, the multi-
channel area will be played back with priority.
STEREO
When playing a Super Audio CD disc, the stereo area
will be played back with priority.
CD
When playing a Super Audio CD disc, the CD layer will
be played back with priority.
When playing back a disc that does not have a
selected area/layer, another area/layer will be played
back automatically.
Select the item that you wish to set and press the
select knob to define it. (Exit the setting mode
automatically.)
M
UL
TI
S
T
ER
EO
CD
SELECT
PUSH ENTER
Main unit