Q-See QS408 DVR User Manual


 
33
CHAPTER 4 BASIC OPERATION
Video Play Settings
Each video record contains data from all the cameras that were recording at that time. You can
view up to four of those recordings at one time by clicking on the “Play All Channels” button
(Item number 14 in Picture 4-21). Or, you can choose which channel will be played back
in the Playback software by following these steps:
PICTURE 4-22
PICTURE 4-23
PICTURE 4-24
PICTURE 4-25
STEP 1. In the Setting menu in the
Playback software toolbar, select
Video Play Setting
STEP 2. From that pull-down menu,
choose Normal Video Bar.
STEP 3. In the resulting pop-up window,
choose which channel you wish to
view.
STEP 4. Check the box next to “Play
the Video”. Click Apply then OK.
Audio Settings
If you have connected an audio-capable camera or a microphone to Channels 1 or 2, you can
play back recorded audio along with the video.
STEP 1. In the Setting menu in the
Playback software toolbar, select
Audio Channel Setting.
STEP 2. From that pull-down menu,
choose Normal Video Bar.
STEP 3. In the resulting pop-up window,
choose which channel you wish to
enable audio for.
STEP 4. Check the box
next to “The
channel has sound data”. Click Apply
then OK.