Filter
Top Products
41
CHAPTER 6 ADVANCED FEATURES
6.3 SYSTEM INFO
This window will allow you to view system information - including the firmware version, MAC
address, and serial number of the system.
PICTURE 6-5
PICTURE 6-6
Check this window to determine whether
you need to update to a newer version of the
firmware. Updating the firmware is covered in
Section 6.4 System.
MOTION DETECTION
This was covered in Section 5.4 Motion Detection.
MOBILE ACCESS
This will be covered in Section 7.4 Mobile Access
6.4 SYSTEM
Use the System menu to update system firmware and set an automatic system reset
schedule.
Like most conventional computers, the DVR
can benefit from being occasionally shut
down and re-started. This clears the memory
and improves performance.
ENABLING AUTO-RESET
STEP 1. Select On in the AUTO RESET
pull-down menu. The Settings option
will appear below.
STEP 2. In the SETTINGS pull-down
menu, select EVERY DAY, EVERY
WEEK, or EVERY MONTH. If you
choose EVERY MONTH, the date
drop-down menu will appear.
STEP 3. Select the date for auto-reset
from the drop-down menu.
STEP 4. Enter the time for auto-reset
using the Virtual Keyboard.
STEP 5. Click APPLY, then click CLOSE
in the confirmation window.