Filter
Top Products
51
CHAPTER 7 REMOTE ACCESS
PICTURE 7-20
PICTURE 7-21
PICTURE 7-22
PICTURE 7-23
STEP 1. Select DHCP from the Type
drop-down menu,
STEP 2. Click on APPLY
STEP 3. Select EXIT.
STEP 4. Restart the DVR.
Once the DVR has restarted, reopen the
Network Setup window and the IP address
of the DVR will now be listed. This is the
address to which you will forward ports 80
and 9000. If you plan to access your DVR via
a smartphone, you will need to forward port
100 as well.
PART 2: DETERMINE THE NUMBER OF ROUTERS ON THE NETWORK
To find out the number of routers on your network, you will need to download a FREE router
detection program.
STEP 1. Go to http://www.pcwintech.
com/shanes-toolbox
STEP 2. Click on Detect Multiple
Routers to begin the download.
STEP 3. Unzip the application to install it.
STEP 4. Click on the detect_routers
application to run it.