Filter
Top Products
11
3.4 Hard Disk Connection
There are processing to install the hard disk.
Note: If the DVR comes with a HDD pre-installed then skip the following steps.
3. Open the top cover of the drawer.
If you have another HDD, please jump that HDD to SLAVE, and open then machine, put the HDD
to the HDD rack, and then connect the power cord and DATA cable.
1. Pull out the hard drive rack from DVR
side panel.
2. Connect the DATA cable & power cord.
4. Close the top cover of the drawer and
put the hard drive drawer back into the
DVR
5. Lock the hard drive draw by turning the key clockwise.