Filter
Top Products
24
5.5.2. MAC SET
When the cursor moves to Mac Set then press the Enter button, the Mac Set window will appear.
If you have more than one DVR in a local area network, you have to set each DVR to have an
exclusive MAC address, but remember that you have only one chance to modify the MAC
address, once you have changed the MAC address, this menu will not appear again. If you want
to change the MAC address again, please load the factory set, then you can change the MAC
address. For MAC address, you’d better set the first two bytes to “00 00”, and change other bytes.
5.6 SENSOR SETUP
When the cursor moves to Sensor Set, then press the Enter button, the sensor setup window will
appear. Press UP or DOWN button to move the cursor. Press LEFT or RIGHT to change the
value.