Filter
Top Products
23
IP MODE: the DVR has 2 IP modes, STATIC IP and DHCP, if you select STATIC IP, you can set
the IP address manually, if you select DHCP mode, the DVR will automatically get the IP address.
For STATIC IP, press UP or DOWN button to move the cursor among the digits, you can press
LEFT and RIGHT buttons to modify the digits, press enter to save you change.
WEB SERVER PORT: the WEB transmit port for data. Default is 0080.
NETWORK ENV: the DVR has three types of different network conditions: LOCAL, EXTER_LAN,
and EXTER_WAN. If in local network, please select LOCAL. If for internet use, please choose
EXTER_LAN. If the internet condition is not very good, please select EXTER_WAN.
VIDEO PORT: the video transmit port for the computer. Default is 5000.
COMMAND PORT: the command transmit port for the computer. Default is 5001.
If you change any of the VIDEO PORT and COMMAND PORT or MAC address, you have to
restart the DVR before you use the “net viewer” software.
Notice: if you have changed the MAC address, you will not have access to the “MA
C ADDR SET” Option.
5.5.1. N/W ENABLE SET
When the cursor moves to N/W Enable, press the Enter button, and the N/W Enable setup
window will appear.
If one channel here set OFF, this channel will not transmit to the network, so if you want to see a
channel from network, you must to set this channel ON.