Filter
Top Products
22
5.4.2 REC CH SET
When the cursor moves to REC ch Set, please press enter button, the REC ch setup window
will appear. This screen is different for CIF and FIELD modes . In FIELD mode, the window is
illustrated as below, press UP and DOWN buttons to select channel and press LEFT or
RIGHT button to change the setting, if the channel is set “OFF”, this channel will not record
when in recording mode. If the resolution is set to "CIF ", the REC ch Setup window can not
be setup.
5.4.3 RECORD LENGTH SET
To set the file package time in continuous time record mode
5.5 NETWORK SETUP
When the cursor moves to Network Set, press the Enter button, and the network setup window
will appear. Please note if the Netviewer software is connected to the DVR. You cannot access
this menu unless you close the Netviewer software.