Filter
Top Products
QSTD2400 Series DVR User’s Manual
9
2.4 Remote Control
The remote control uses two AAA size batteries and works after loading batteries
as follows:
STEP1 Open the battery cover of the Remote Control
STEP2 Insert batteries. Please make sure the poles (+ and -) are correct
STEP3 Replace the battery cover
Notice: If the remote control does not work, check the following:
1. Check the poles of the batteries.
2. Check the remaining charge in the batteries.
3. Check to see if the sensor on the remote or the DVR is blocked or dirty.
If it still does not work, Please contact Q-See to get a new remote control.
The layout of the remote control is shown in Fig 2.10 Remote Control
Fig 2.10 Remote Control
Item Name Function
1 Power Button
Soft off switch to stop firmware running. Push it before
powering off the DVR.
2 INFO Button
Get information about the DVR like firmware version,
HDD information
3 REC Button To record manually
4 Number Buttons Input numbers or choose cameras
5 Multi Screen Button To choose multi screen display mode
6 SEARCH Button To enter search mode
7 MENU Button To enter menu
8 ENTER Button To confirm the choice or setup
9 Direction Button Move cursor in setup or pan/tilt/zoom (PTZ)
10 +/- Button To increase or decrease the value in setup
11
Playback Control
Button
To control playback, Fast forward/rewind/stop/single
frame play
12 AUDIO Button To enable audio output in live mode
13 Auto Dwell Button To enter auto dwell mode
14 BACKUP Button To enter backup mode
15 PTZ Control Button
To control PTZ cameras:
Move camera/ZOOM/FOCUS/IRIS/SPEED control