Filter
Top Products
QSTD2400 Series DVR User’s Manual
17
3.3.4 Motion Detection Recording
This unit supports recording channels and PTZ linking. This means it will
record on any cameras, or trigger any speed dome to go to presets or do
auto cruise once motion is detected.
STEP1 Enter MOTION configuration and select camera or channel
Fig 3.10 Motion Detection Setup
STEP2 Put check mark in Enable Detection box first, and then enter Area
to set Sensitivity and detection Area. In detection area, red means not
sensitive, which will not trigger recording, transparent means available or will
trigger recording, see Fig 3.10 Motion Detection Area Setup. Sense the
sensitivity can be influenced by the color and time (day or night), users can
adjust its value according to the present conditions.
Fig 3.10 Motion Detection Area Setup
STEP3 Enter Trigger configuration, see Fig 3.11 Trigger Setup
Fig 3.11 Trigger Setup