Filter
Top Products
10
© 2001 Directed Electronics, Inc.
TO DETACH THE FRONT PANEL
1. Press OPEN; the front panel will fold down.
2. Press the RELEASE button (9) on the back-
side of the front panel and pull outward.
3. For safekeeping, store the front panel in
the supplied protective case immediately
after removing.
4. Push the front metal plate up to the main
body. A click sound will be heard.
TO RE-INSTALL THE FRONT PANEL
1. Place the front panel into its opening and
firmly press on both ends until a click is
heard.
2. If the front panel fails to lock in position
properly, the display panel and buttons
may not operate properly. Press OPEN,
then re-install the front panel again.
PRECAUTIONS WHEN HANDLING
1. Do not drop the front panel.
2. Do not put pressure on the display or con-
trol buttons when detaching or re-
installing the front panel.
3. Do not touch the contacts on the front
panel or on the main unit body. It may
result in poor electrical contact.
4. If any dirt or foreign substances adhered
on the contacts, they can be removed with
a clean, dry cloth.
5. Do not expose the front panel to high tem-
peratures or direct sunlight.
6. Keep any volatile agents (e.g. benzene,
thinner, or insecticides) from touching the
surface of the front panel
7. Do not attempt to disassemble the front
panel.