9
© 2001 Directed Electronics, Inc.
Front Panel Operation
■
Power ON/OFF - Press the POWER button
(3) to turn the unit on/off.
■
Opening the Front Panel - Press the OPEN
button (2) and the front panel will fold
down.
■
Closing the Front Panel - Push the front
panel up gently until a click is heard.
■
Loading a Disc - Open the front panel and
insert the disc (label side up) into disc slot
(5). Then close the front panel and unit
will begin playback.
■
Ejecting a Disc - Open the front panel and
press the EJECT button (8). Then remove
the disc and close the front panel.
■
Resetting - The reset button can be acti-
vated with either a ballpoint pen or thin
metal object. The reset button is to be
activated for the following reasons:
■
Initial installation of the unit after
all wiring is completed.
■
Function buttons do not operate
normally.
■
Error symbol on the display.
FRONT PANEL FEATURES
1 IR Receiver Receives the signal from the remote control.
2 Open Button Opens the front panel.
3 Power Button Turns the unit on/off.
4 Display Displays unit status.
5 Disk Slot Insert the disk here.
6 Security LED LED blinks when the front panel is removed.
7 Reset Button Resets the unit’s microprossesor
8 Eject Ejects the disk.
9 Release button Releases front panel.
42 1
3
56
8
7
RESET
9