Filter
Top Products
3
player using code 765, follow the instructions to program the remote to
operate the TV using code 765, and then repeat the instructions for the
DVD using the same code. Put the remote in TV mode to use TV
functions, or DVD mode to use the DVD player (or VCR) functions.
LIMITED MODE
You can program your remote control in Limited Mode to keep from
accidentally changing the channel on your TV or VCR. When you use
the remote control to operate your TV in Limited Mode, you will only
be able to use the POWER, MUTE, and VOLUME buttons to operate
your TV. Also, when you use the remote control to operate your VCR
in Limited Mode, you will only be able to use the POWER and VCR
function buttons. The section Programming Using the Equipment Code
Tables has a step that tells the remote control to go into Limited Mode.
Also, a quick way to put the remote in Limited Mode is described on
page C-6.
Note: Limited Mode cannot be used with audio amplifiers.
PROGRAMMING USING EQUIPMENT CODE TABLES
You can set up the remote control to operate other equipment using the
code-table listings that start on page 17 and the modes as shown on
page 1. To control a receiver in AUX mode, see page 7.
Instructions Additional Information
1 Turn the equipment on. Use the equipment’s front panel
buttons or its own remote
control.
2 Find the brand name of the
equipment listed in the
code tables that start on
page 17.
If the brand isn’t listed in the
tables, see Scanning for
Equipment Codes on page 5.
3 Press and hold the mode
button for the equipment
until all the other mode
buttons light up, and then
release the button. The
mode button flashes.
For example, hold the TV mode
button for a TV until all of the
other mode buttons light. When
you let go, the TV mode button
will be flashing.