Filter
Top Products
11
USING THE SYSTEM WIZARD
By pressing and holding the 0 (zero) key on the DISH Network remote
control for TV1 (or for TV2, if you have set it to IR only, as on page
14), you enter the System Wizard, viewable on TV1 (see page C-1).
The System Wizard can help you diagnose certain problems you may
be having with your DISH Network remote control, including:
• .Remote Is Not Recognized
• Adjust Remote Configuration
• Resolve Address Conflict.
REMOTE IS NOT RECOGNIZED
The remote may not be immediately recognized by your receiver.
If you select Continue, the wizard tries to configure your receiver and
remote control to work together.