Filter
Top Products
11
Need help? Call 800-305-2204
Step 5: Adjusting the tilt
Note: The tilt on the left TV bracket (B) and right TV bracket (C) must be the same.
1 Use a Phillips screwdriver to remove the two tilt screws (S) from the outside edges of each TV bracket (B and C).
2 To tilt the TV forward by 5°, push the tilt brackets on the left TV bracket (B) and right TV bracket (C) down.
OR
To keep the TV completely vertical, push tilt brackets on the left TV bracket (B) and right TV bracket (C) up.
3 Re-insert two tilt screws (S) into each TV brackets (B and C), then tighten the screws.
CAUTION: Do not over tighten the screws.
You’ll need:
S S
B C
B C
S S
B C B C
Option 1: Mount tilted -5°
Option 2: Mount not tilted
&
&
&
&
Tilt bracket
Tilt bracket
&
&
Phillips screwdriver
DX-DRTVM102_12-1058_MAN_V3_ENG.fm Page 11 Wednesday, April 10, 2013 3:14 PM