Filter
Top Products
9
Need help? Call 800-305-2204
Step 3: Determine whether your TV has a flat back or an irregular or obstructed back
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and
scratches.
2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for
instructions.
3 Temporarily lay the TV brackets (B and C) on the back of your TV.
4 Align the screw holes in the TV brackets with the mounting screw holes on your TV.
5 Identify which type of back your TV may have:
• Flat back: The bracket lays flush against the back of your TV and does not block any jacks. You do not need spacers when
assembling the wall mount.
• Obstructed back: The bracket blocks one or more of the jacks on the back of your TV. You will need spacers when
assembling the wall mount.
• Irregularly-shaped back: There is a gap between the bracket and some part of the back of your TV. You will need
spacers when assembling the wall mount.
6 Remove the TV brackets.
DX-DRTVM102_12-1058_MAN_V3_ENG.fm Page 9 Wednesday, April 10, 2013 3:14 PM