Filter
Top Products
20
Using the DVD player
Turning the screen saver on and off
To turn the screen saver on and off:
1 While your TV combo is in DVD mode, press SETUP. The General
Setup icon is highlighted.
2 Press PLAY. The General Setup Page opens.
3 Press or to highlight Screen Saver, then press PLAY.
4 Press or to highlight On or Off, then press PLAY.
5 Press one or more times to go back to the previous menu.
6 To close the menu, press to highlight the Exit icon, then press
PLAY.
Using DVD last memory
Your TVcombo can remember where a DVD stopped playing when your
TV combo is turned off. When your DVD combo is turned on and you start
DVD playback, playback resumes at the point where it stopped.
To use last memory:
1 While your TV combo is in DVD mode, press SETUP. The General
Setup icon is highlighted.
2 Press PLAY. The General Setup Page opens.
3 Press or to highlight Last Memory, then press PLAY.
4 Press or to highlight On or Off, then press PLAY.
5 Press one or more times to go back to the previous menu.
6 To close the menu, press to highlight the Exit icon, then press
PLAY.
Setting up DVD speaker output
To set up speaker output:
1 While your TV combo is in DVD mode, press SETUP.
2 Press or to select the Audio icon, then press PLAY. The
Audio Setup Page opens.
3 Press or to highlight Speaker Setup, then press PLAY.
The Speaker Setup Page opens.
4 Press or to highlight Downmix, then press PLAY.
5 Press or to highlight Lt/Rt or Stereo, then press PLAY.
• Lt/Rt–On a disc recorded with a multichannel soundtrack,
the output signal will be incorporated into the left and right
channel.
• STEREO–On a disc recorded with a multichannel soundtrack,
the output signal will be incorporated into stereo.
6 Press one or more times to go back to the previous menu.
7 To close the menu, press to highlight the Exit icon, then press
PLAY.
Setting up DVD Dolby Digital
To set up Dolby Digital:
1 While your TV combo is in DVD mode, press SETUP.
2 Press or to select the Audio icon, then press PLAY. The
Audio Setup Page opens.
3 Highlight Dolby Digital Setup, then press PLAY. The Dolby
Digital Setup Page opens.
4 Press or to highlight DUAL MONO or D.R.C, then press
PLAY.
• DUAL MONO–This is the output mode for the left and right
signals of the selected audio output. If it is set to MIXED
MONO, the function only works when the DVD uses
5.1-channel sound.
• D.R.C–Select to adjust the linear compression rate to obtain
different compression results for the signals.
5 Press or to change the setting, then press PLAY.
6 Press one or more times to go back to the previous menu.
7 To close the menu, press to highlight the Exit icon, then press
PLAY.
-- Audio Setup Page --
Speaker Setup
Dolby Digital Setup
Channel Equalizer
3D Processing
Go To Speaker Setup Page
-- Speaker Setup Page --
Downmix STR Lt/Rt
Stereo
Audio Setup
-- Audio Setup Page --
Speaker Setup
Dolby Digital Setup
Channel Equalizer
3D Processing
Go To Speaker Setup Page
-- Dolby Digital Setup --
Dual Mono STR Stereo
Left Mono
Right Mono
Mixed Mono
D.R.C
Audio Setup