Filter
Top Products
10
Installation instructionsDX-TVM111
STEP 5 - Option 2: Attaching the mounting hardware to TVs with irregular or obstructed
backs
1 Align the TV bracket (A) with the screw holes on the back of the TV.
2 Place spacers (F) behind the TV bracket and the washers (E) over the holes in the TV bracket, then insert the
screws (D) through the washers, TV bracket, and spacers.
NOTE: If the hole pattern on your TV is 75 mm x 75 mm, do not use the washers (E).
3 Tighten the screws until they are snug against the TV bracket. Do not over tighten.
Yo u ’ l l n e e d
E (4)
D (4)
Phillips screwdriver
Screws
Washers
Spacers
F (4)
TV bracket (A)
DX-TVM111_12-1055_MAN_V1_ENG - GIF.fm Page 10 Friday, March 22, 2013 4:12 PM