Filter
Top Products
Installation instructions
9
DX-TVM111
STEP 5 - Option 1: Attaching the mounting hardware to TVs with a flat back
1 Align the TV bracket (A) with the screw holes on the back of the TV.
2 Install washers (E ), and screws (C) into the top two holes in the back of the TV.
NOTE: If the hole pattern on your TV is 75 mm x 75 mm, do not use the washers (E).
3 Tighten the screws until they are snug against the TV bracket. Do not over tighten.
You’ll need
E (4)
C (4)
Phillips screwdriver
Screws
Washers
TV bracket (A)
DX-TVM111_12-1055_MAN_V1_ENG - GIF.fm Page 9 Friday, March 22, 2013 4:12 PM