Filter
Top Products
Installation instructions
7
DX-TVM111
STEP 3 - Determine whether your TV has a flat, irregular, or obstructed back
1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages
and scratches.
2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV
for instructions.
3 Temporarily lay the TV bracket (A) on the back of your TV.
4 Align the screw holes in the TV bracket with the mounting screw holes on your TV.
5 Identify which type of back your TV may have:
• Flat back: The bracket lays flush against the back of your TV and do not block any jacks. You do not need spacers when
assembling the wall mount.
• Obstructed back: The bracket blocks one or more of the jacks on the back of your TV. You will need spacers when
assembling the wall mount.
• Irregularly-shaped back: There is a gap between the bracket and some part of the back of your TV. You will need
spacers when assembling the wall mount.
6 Remove the TV bracket (A).
DX-TVM111_12-1055_MAN_V1_ENG - GIF.fm Page 7 Friday, March 22, 2013 4:12 PM