Filter
Top Products
30
Computer Input
Adjust the horizontal area displayed by this projector.
Press the Point
◄► buttons to decrease/increase the
value.
Display area H
Adjust the vertical area displayed by this projector. Press
the Point
◄► buttons to decrease/increase the value.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store adjusted data, move the red frame pointer to the
Store item and then press the SELECT button. Move the
red arrow pointer to any of Mode 1 to 5 in which you want
to store and then press the SELECT button.
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box appears and
then select [Yes]. All adjustments return to their previous
figures.
Mode free
To clear the stored data, move the red frame pointer to the
Mode free item and then press the SELECT button. Move
the red arrow pointer to the Mode that you want to clear
and then press the SELECT button.
Note:
• D
isplay area (H/V) cannot be selected when 480i,
575i, 480p, 575p, 720p, 1035i, or 1080i is selected in
the PC System Menu (p.27).
• PC Adjust Menu cannot be selected when Computer
1(Digital) is selected in the Input Menu. (p.26)
Vacant Mode Values of "Total dots",
"Horizontal", "Vertical",
"Display area H" and
"Display area V".
Close this dialog box.
To store adjusted data
To clear adjusted data
This Mode has stored parameters.
Mo ve th e re d f rame
pointer to an item and
press the SELECT button.