Filter
Top Products
46
Auto setup
This function enables Input search, Auto Keystone
correction and Auto PC adjustment by pressing the AUTO
SETUP button on the top control or the AUTO SET button
on the remote control. Settings for those functions can be
altered as follows:
Input search
This function detects the input signal automatically. When
finding a signal, the search will stop. Use the Point
◄►
buttons to select one of the following.
Of
f
. . . . Input search does not work.
On1
. . . Input search works under the situation below.
• When pressing the AUTO SETUP button on the top
control or the AUTO SET button on the remote control.
On2
. . . Input search works under the situation below.
• When turning on the projector with pressing the POWER
ON/STAND-BY button on the top control or on the remote
control.
• When pressing the AUTO SETUP button on the top
control or the AUTO SET button on the remote control.
• When missing the current input signal.
• If the No show or Freeze function is active, cancel it to
activate the Input search. It is also unavailable when
On-Screen menu is displayed
.
•
While Input Search is set On1 or On2, the status of
Input and Lamp mode are displayed every time the
signal is switched.
•
If any of the COMPUTER 1/2, VIDEO, S-VIDEO
or COMPONENT buttons on the remote control, or
AUTO SETUP button on the top control is pressed
while Input search is on, Input search will stop.
Auto PC
Adj.
On . . . . Enables Auto PC Adjustment when pressing the
AUTO SETUP button on the top control.
Off . . . . Disables Auto PC Adjustment.
Auto Keystone
Auto . . . Always works and corrects keystone distortion
according to the projector's tilt.
Manual
. Works only when pressing the AUTO SETUP
button on the top control or the AUTO SET
button on the remote control.
Off . . . . Disables Auto Keystone.
Notes:
• Input search, Auto PC Adj. and Auto
Keystone cannot be set "Off" at the
same time.
•
Auto Keystone adjusts automatically
by pressing the AUTO SETUP button
either it is set on "Auto" or "Manual" in
setting menu.
•
Auto Keystone corrects vertical
distortion only, not correct horizontal
distortion.
•
The Auto Keystone cannot work
when Ceiling feature is set "On" in the
Setting menu (p.50).
•
Perfect correction of the image
distortion cannot be ensured with the
Auto setup function. If the distortion is
not corrected properly by pressing the
AUTO SETUP button, adjust manually
by pressing the KEYSTONE button
on the remote control or selecting
Keystone in the Setting menu (pp.22,
24, 47).
•
Fine sync, Total dots, Horizontal and
Vertical position of some computers
cannot be fully adjusted with the Auto
PC Adjustment function. When the
image is not provided properly with
this operation, manual adjustments are
required (pp.29–30).
Setting
Se lec t Aut o s etu p
and this box appears.
Choose the desired
setting for Input search,
Auto keystone and Auto
PC adj. with the Point ◄
► buttons.