Filter
Top Products
38
Video Input
Choose Computer 2 by pressing the INPUT button on
the top control or press the COMPUTER 2 button on
the remote control. Choose Component by pressing
COMPONENT button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Input Source Selection (Component, RGB Scart 21-pin)
Direct Operation
Press the Point ▲▼ buttons to move the red arrow
pointer to Computer 2 and then press the SELECT
button.
After the Source Select Menu appeared for Computer
2, move the pointer to Component or RGB(Scart) and
then press the SELECT button.
1
2
3
Menu Operation
Press the MENU button to display the On-Screen
Menu. Press the Point
◄► buttons to move the red
frame pointer to the Input Menu icon.
Note:
When the Input Search function is set to “On1” or
“On2”, the input signal will be searched automatically
(p.46).
When the input source is coming from
video equipment connected to the
COMPUTER IN 2/COMPONENT IN
terminal with a Component-VGA Cable,
select Component.
When the input source is coming from
video equipment connected to the
COMPUTER IN 2/COMPONENT IN
terminal with a Scart-VGA Cable, select
RGB (Scart).
Component
RGB (Scart)
Remote Control
1
2
+
_
COMPUTER 2 button
COMPONENT button
Computer 1 (Analog)
Computer 2
Computer 1 (Digital)
Top Control
INPUT button
Video
Input Menu
Computer
2
Move the pointer (red
arrow) to Computer 2 and
press the SELECT button.
Move the pointer to
Component or RGB(Scart)
and press the SELECT
button.