Filter
Top Products
List of Functions
36
Operation Direct Power On: You can set whether Direct Power On is enabled (On) or disabled (Off).
When it is set to "On" and the projector power cable is connected to an electrical outlet, be aware that sudden surges of electricity when power
comes back on after a power outage may cause the projector to turn on automatically.
Sleep Mode:
• You can set whether projection stops automatically (On) or not (Off) when no operations are carried out for about 30 minutes while no image
signals are being input.
• You can set whether the power turns off automatically (On) or not (Off) after about 30 minutes when the A/V mute slide is closed.
Sleep mode is set to (Off) at the time of purchase, so do not forget to turn off the power after projecting.
High Altitude Mode: Set to "On" when using the projector above an altitude of 1500 m.
Standby Mode
(EMP-1715/1705
only)
You can use network monitoring and control functions while the projector is in standby mode when this is set to "Network On".
You can use SNMP
g to monitor and control the status of the projector over the network, or by using the "EMP Monitor" software supplied with this
product.
USB Type B
(EMP-1715/1705
only)
Set to "EasyMP" when the projector and a computer are connected by a USB cable and computer images are projected. s Wireless LAN Quick
Connection Guide
Link 21L You can set whether or not to use EMP Link21Lg utility software.
(Select it after setting "USB Type B" to "Link 21L".)
Multi-screen You can adjust the hue and brightness of each projected image when multiple projectors are lined up and projecting. s p.23
Screen ID: When performing "Image Correction" for "Multi-screen" by using one remote control for multiple projector's, you can define which
projector to use when individual IDs are set.
The IDs set here are only effective during "Image Correction" for "Multi-screen".
Image Correction: You can make the following adjustments.
• Adjustment Level: You can adjust from black to white in five stages called levels 1 to 5, and in each level 1to 5 you can adjust "Brightness
Correct." and "Color Correct".
• Brightness Correct.: Corrects the difference in the brightness of each product.
• Color Correct. (G/R) / Color Correct. (B/Y): You can correct the difference in the colour of each product.
Language You can set the language for message displays.
Reset You can reset "Display
*1
" and "Operation
*2
", in the "Extended" menu to their default settings.
To return all menu items to their default settings, see s p.39
*1 When "User's Logo Protect" is set to "On" in "Password Protect", settings relating to user's logo cannot be changed. You can make changes after setting "User's
Logo Protect" to "Off". s p.27
*2 Except for "High Altitude Mode".
Sub Menu Function