Filter
Top Products
Problem Solving
49
f Image colours are not right
f Images appear dark
f Problems when projection starts
f Power does not turn on
Check Remedy
Do the input signal settings match the signals from the
connected device?
Change the following settings according to the signal for the connected equipment.
When projecting images from equipment connected to Computer (Component Video) s"Signal"-
"Computer Input" p.33
When projecting images from equipment connected to Video or S-Video s"Signal"-"Video Signal
System" p.33
Is the image brightness adjusted correctly? Adjust the "Brightness" setting from the configuration menu. s"Image"-"Brightness" p.32
Are the cables connected correctly? Check that all the cables required for projection are securely connected. sQuick Start Guide
Is the "contrastg" setting adjusted correctly? Adjust the "Contrast" setting from the configuration menu. s"Image"-"Contrast" p.32
Is the colour adjusted correctly? Adjust the "Color Adjustment" setting from the configuration menu. s"Image"-"Color Adjustment" p.32
Are the colour saturation and tint adjusted correctly? Adjust the "Color Saturation" and "Tint" settings from the configuration menu. s"Image"-"Color
Saturation", "Tint" p.32
Check Remedy
Are the image brightness and luminance adjusted correctly? Adjust the "Brightness" and "Brightness Control" settings from the configuration menu.
s"Image"-"Brightness" p.32 s"Settings"-"Brightness Control" p.34
Is the "contrastg" setting adjusted correctly? Adjust the "Contrast" setting from the configuration menu.
s"Image"-"Contrast" p.32
Is the lamp due for replacement? When the lamp is nearly ready for replacement, the images become darker and the colour quality becomes
poorer. When this happens, replace the lamp with a new lamp. s p.56
Check Remedy
Did you press the [Power] button? Press the [Power] button to turn the power on.
Are the indicators switched off? The power cable is not connected correctly or power is not being supplied normally.
Connect the projector's power cable correctly. sQuick Start Guide
Check that your electrical outlet or power source is functioning correctly.
Only when projecting images from a video source