Filter
Top Products
91
Input the Static IP address, the Subnet Mask, and the Gateway that you obtained from the internet
service provider.
Note: If you have a dynamic IP address, you can set the DVR to DHCP to automatically detect
the network settings. Therefore, it can use a dynamic IP address.
Exit from the DVR’s Menu to save the settings.
To access the DVR from a computer, open Internet Explorer and in the address bar type:
http:// (IP address given by your internet service provider)
Note: When using this type of connection, only one device can be connected to the modem at
a time. You will need to use a computer at a different location to test the connection.
5.9 ROUTER OR LAN CONNECTION
Straight Through Ethernet Cable Pin outs:
Cat 5
Straight Through
Cable
Internet
Hi-speed Modem
DVR
Router