Filter
Top Products
5.8 Select Source
Function 8 Select Source is to let you select the data on DVD-ROM, DVD writers or
HDD as the source from which copying will be done.
8.Select Source
Select function 8.
Press ENT , and then press s t to select the source as shown below.
Src: DVD-ROM
01 IDE1 Master
After selecting the source such as DVD-ROM, you can press ENT, and LCD will
show the message as follows.
DVD-ROM selected!
Suppose you select HDD as the source and try to copy from one of its partitions, but
the partition contains no data, an error message will appear on LCD. At this moment,
you can switch to another partition that contains data, or use function 9 Image to
load the data into the chosen partition first.
Page 12