Filter
Top Products
TView Micro SXGA User’s Guide
Hardware Installation
16
SCART Connection (Europe Only)
SCART is a high-quality video connection used on most televisions
and VCR's in Europe. The connector on the SCART cable provided
with the TView Micro SXGA has two different connectors. The larger
end of the cable is rectangular in shape and contains 20 small metal
pins. This larger end of the cable plugs into the matching port on the
television or VCR. The smaller end of the SCART cable has a round
plug with several small metal pins and connects to the port labeled
SCART/S-Video on the Micro SXGA.
Additionally, the SCART connector provided with the TView Micro
SXGA can accept audio input from your computer. To utilize this
function, connect a standard 1/8" male mini stereo cable (not
included) to the female connector attached to the larger end of the
SCART cable.
To connect the TView Micro SXGA unit to your
television, perform the following steps:
1. Connect one end of the supplied composite video cable to the
“Comp Video” port located on the side of the TView Micro SXGA
unit, or connect the male end of the S-Video cable to the port on
the side of the TView Micro SXGA labeled either "SCART/S-
Video."
2. Connect the other end of the composite cable or S-Video cable
to the Comp Video in or S-Video in port at on the television.
3. Turn the television on.
4. Turn the TView Micro SXGA on.
5. Turn your computer on. If the cables have been connected