Filter
Top Products
TView Micro SXGA User’s Guide
Image Control
28
Auto-Save Memory Function
After you have changed the settings of the TView Micro SXGA, the
changes are automatically saved to memory with the unit’s auto-save
memory function. The green LED on the front of the unit flashes off
for about one second to indicate that the settings have been
successfully saved to memory. All settings are saved even if the unit
is powered off and on.
To restore all settings to their defaults, press all four (4) buttons at
the same time and hold them down for at least five seconds. When
the buttons are released, all settings are returned to their defaults.
Functions of the TView Micro SXGA LED
The LED located on the front of the TView Micro SXGA may indicate
four different states. The states are indicated by blinking or steady
red or green lights. See the table below for the meaning of each LED.