Filter
Top Products
4 Using Cartridges
13
E
NOTE:
Stick magazine and cartridge labels firmly in their proper locations. To
avoid jams, use labels according to the guidelines below:
• Do not use a magazine or a cartridge whose label has peeled off.
• Make sure that labels are not sticking out of their proper locations.
• Make sure that labels on cartridges are not folded on their ends.
•
Do not stick labels on top of other labels.
3) The autoloader automatically checks which magazine slots contain cartridges.
This process takes about 20 seconds.
Notes When Using Windows 2000
Read the following if your operating system is Windows 2000.
The autoloader will not be properly detected if the magazine is not installed in-
side the autoloader when the system starts up. The following error will be dis-
played.
Looking at the event viewer’s system log will show the following error for Remov-
able Storage Service.
When such an error occurs, install the magazine into the autoloader and restart
the server. Alternatively, you can follow the steps below to restart the Removable
Storage Service:
(1) Click the [Start] button, point at [Programs] and then [Administrative Tools].
Then select [Services].
(2) Double-click [Removable Storage].
(3) Click the [Stop] button.
(4) Install the magazine into the autoloader.
(5) Click the [Start] button.
**ADMINISTRATOR ALERT**
Configuration for device Changer0 failed. See the
event log for more details.
Unable to auto-configure library unit Changer0. The
current setup of the library unit does not support au-
tomatic configuration. You will either have to modify
the current setup of the library to adhere to automat-
ic configuration guidelines (if possible) or manually
configure the device.