Filter
Top Products
30
Recording
EN
5 Press [TIMER PROG.] to exit.
6 Press [T-SET] to return to the timer
stand-by mode.
To check the timer programming in process
Press [TIMER PROG.].
Note
• If a timer recording is proceeding, that programme is
highlighted in red. In such a case, you cannot select
any other programmes.
• When you check the timer programming in progress
by pressing [TIMER PROG.] during operations of
the component (DVD or VCR) which is not currently
used for the timer recording, the programme will not
be highlighted. In this case, you cannot select other
programmings.
To stop the timer recording in
progress
On the front panel of the unit, press
[STOP
S
] to stop the disc recording or
[STOP / EJECT
SO
] to stop the tape
recording.
Note
• [STOP S] on the remote control is not effective.
If the timer programming did not
complete correctly
The error number appears on the timer programming
list.
The error programme will be displayed in grey with
an asterisk and have an error number.
The error numbers indicate:
E1–E22, E37–E39: Recording error
E23-E24: Unrecordable disc
E25:•Copy prohibited programme
•Cannot record because of the NTSC / PAL-
60 signal is received.
E26–E28: Copy prohibited programme
E29: Disc protected
E30: Disc full
E31: Already recorded 99 titles (Video mode)
E32: Already recorded 99 titles (VR mode)
E33: Already recorded 999 chapters
E34: No space for Control Information
E35: PCA (Power Calibration Area) full
E36: Already finalised Video format disc
E40:•There are some unrecorded parts due the
overlapped timer programmes.
•Recording did not start at the start time.
•There is no tape in the cassette
compartment.
•Tape recording reaches to the tape end
during timer recording.
E41: Power failure
E42: No disc
The error programme will be deleted once you
check the error in the programme list, or once you
cancel the timer-standby mode and re-enter it.
Press [CLEAR] to erase the selected
programme.
PDC (Programme Delivery
Control)
The Programme Delivery Control (PDC) assures that
the TV programmes you have programmed for timer
recording are recorded exactly from beginning to end,
even if the actual broadcasting time differs from the
scheduled time due to a delayed start or extension of
the programme duration. Furthermore, if a
programme is interrupted, the recording will also be
interrupted automatically and resumed when the
programme starts again.
If the PDC signal drops out because the broadcast
signal is weak, or if a broadcasting station does not
transmit a regular PDC signal, the timer recording is
performed in normal mode (without PDC) even if it
was programmed for PDC. If the starting time of the
PDC timer recording is between 0:00 and 3:59 on a
given day, the PDC function will operate from 20:00
on the previous day to 4:00 on the given day. If the
starting time of the PDC timer recording is between
4:00 and 23:59 on a given day, the PDC function will
operate from 0:00 on the day to 4:00 on the given day.
This means that if the relevant programme is
broadcasted within this period, it is recorded correctly.
If the timer is not programmed correctly, the incorrect
timer setting stays in effect unless you cancel it. To
cancel an incorrect timer setting, refer to “Checking,
cancelling, or correcting the timer programming
information” on page 29.
Hints for timer recording
• If there is a power failure or the unit is unplugged for
more than 30 seconds, the clock setting and all
timer settings will be lost.
• If there is no disc or an unrecordable disc in the tray,
the DVD indicator will flash and timer recording will
not occur. Insert a recordable disc.
• If there is no tape or a tape with a record tab is not in
the cassette compartment, the VCR indicator on the
front panel flashes and timer recording cannot be
performed. Please insert a recordable tape.
• When all timer recordings are complete, the
icon flashes. To play back or eject the recorded disc,
press [T-SET], and then press [PLAY P] or
[OPEN / CLOSE / EJECT O].
1.1.
Timer Programming
01/01 12:00 13:00 AV3 DVD E1 ON
3.
- - -
4.
- - -
5.
- - -
6.
- - -
7.
- - -
8.
- - -
- - -
Date Start End CH Speed
PDC
DVD
VCR
VCR DVD
2.
DRV_B2737_B2734.book Page 30 Thursday, March 31, 2005 10:04 PM