Filter
Top Products
32
Recording
EN
Settings for external equipment
Connection to external equipment
Connect the external equipment using either the input
jacks, AV1, AV2, (Rear) or AV3 (Front). However, for
AV3 jacks, you have to select S-VIDEO input or
VIDEO input jacks depending on the connected
devices.
Use commercially available Scart, S-Video or Video
cable and an Audio cable for this connection.
1 In stop mode, press [SETUP].
2 Select “Advanced Setting Menu”
using [Cursor U / D], then press
[ENTER].
If it has already appeared, proceed to step 3.
3 Select “Select Video” using
[Cursor U / D], then press [ENTER].
4 Press [ENTER].
5 Select the input jack type to be used
using [Cursor U / D], then press
[ENTER].
• If you want to use VIDEO input jack (Composite),
select “Video In.”
• If you want to use S-VIDEO input jack, select “S-
Video In.”
6 Press [SETUP] to exit.
Recording from external equipment
Before recording from external equipment, see page
16 for connection instructions.
1 Turn the TV and the unit on, and
select the input of the TV to which
the unit is connected.
2 When you want to record to the disc:
Press [DVD ].
Press [OPEN / CLOSE / EJECT O] to
open the disc tray, then place the
disc to record on.
Press [OPEN / CLOSE / EJECT O]
again to close the disc tray.
When you want to record to a tape:
Press [VCR ].
Insert the tape with a record tab into
the cassette compartment.
3 Select the input terminal to which the
external equipment is connected.
(AV1, AV2 or AV3)
To use the input jacks on the back of the unit,
select the “AV1,” “AV2,” position by pressing [0],
[0], [1] or [0], [0], [2] on the remote control or
using [PROG. U / D].
To use the input jacks on the front of this unit,
select “AV3” position by pressing [0], [0], [3] on
the remote control or using [PROG. U / D].
4 Select a recording speed using
[REC SPEED].
Refer to “Recording speed” on page 22 for DVD or
page 63 for VCR.
5 Press [RECORD] on the unit to start
recording.
6 Press the PLAY button on the
external recording component.
7 For disc:
Press [STOP S] on the unit to stop
recording.
For tape:
Press [STOP / EJECTSO] on the unit
to stop recording.
DVD-RWDVD-RW
Video
DVD-RWDVD-RW
VR
DVD-RDVD-R
VCR
VCR
VCR
AV3 (Front)
S-Video In
Video In
VCR DVD
DVD-RWDVD-RW
Video
DVD-RWDVD-RW
VR
DVD-RDVD-R
VCR
VCR
VCR
DRV_B2737_B2734.book Page 32 Thursday, March 31, 2005 10:04 PM