Filter
Top Products
2. VIDEO PLOTTER
2-17
b) Press the [ENTER] key.
c) Press the numeric key to enter the value of longitude in eight digits, and
then press the [ENTER] key. If necessary, press the [2] key to select East or
West.
d) Press the [ENTER] key.
6. To enter other waypoint, repeat step 4 and 5.
Entering waypoints at own ship’s position
1. Press the [NAV MENU], [4], [2] key in that order to show ENTER WPT menu.
2. Press the [3] key to select OWN SHIP POSN at WPT ENTER MODE (item 3)
field, and then press [ENTER] key.
3. Press [2] key to select WPT NO.
4. Press the numeric key to enter the desired number for the waypoint in two
digits, and then press the [ENTER] key.
The waypoint is entered at own ship’s position.
2.7.2 Waypoint list
The waypoint list stores position data of all registered waypoints. You can display
it as follows.
1. Press the [NAV MENU], [4] key in order to show ENTER WPT, NAV LINE
menu.
[ENTER WPT,
NAV LINE]
1 [VIDEO PLOTTER 1]
2 [ENTER WPT]
3 [WPT LIST]
4
5 [ENTER NAV LINE]
6 [NAV LINE LIST]
Enter wpt, nav line menu
2. Press the [3] key to show WPT LIST.