Filter
Top Products
2. VIDEO PLOTTER
2-27
2. Pres the [NAV MENU] , [6] key in order to select CARD.
3. Press the [6] key to select RECORD
4. Press the [ENTER] key to show RECORD CARD menu.
[RECOARD CARD]
1 [VIDEO PLOTTER 1]
2 OWN SHIP PLOT
FILE
3 TARGET PLOT
FILE
4 MARK
FILE
0 FORMAT
NO/YES
Record card menu
5. Press the [0] key twice to select YES at FORMAT (item 0) field.
6. Press the [ENTER] key.
When the formatting finishes, “COMPLETED” appears at the bottom of the
menu.
2.9.2 Recording data
When the track memory becomes full, the oldest track is erased to make room
for the latest. Further, when the mark memory becomes full you cannot enter
another mark unless you erase a mark. Thus you should save important data to
a memory card.
1. Insert a formatted memory card in the right hand card slot.
2. Press the [NAV MENU] key.
3. Press the [6] key several times to select RECOARD at CARD (item 6) field.
4. Press the [ENTER] key.
5. Press the appropriate key depending on the recorded item.
Own ship’s track: [2] key
Target track: [3] key
Marks: [4] key
6. Press the numeric key to enter the file title (max. seven digits).
7. Press the [ENTER] key.
When the recording finishes, “COMPLETED” appears at the bottom of the menu.