Filter
Top Products
30
• To turn a GROUP off, press and release the CH - key for less
than one second. The screen will display OFF above the
selected GROUP.
Removing a Device (Node / Light) From a Group:
This only removes the device from a specific group. The device is
still part of your home control network and the group still exists (if
there were more than one device in it to start).
1. Enter Z-Wave setup mode and highlight GROUP SETUP
2. Press OK; the screen will display ADD
3. Press the right arrow key once; the screen will display REMOVE
4. Press OK; the screen will display SEL DIGIT
5. Press a digit (1-9) for the group you wish to remove the device
from. Press SHIFT and the digit (1-9) if you are removing a
device from groups 10 through 18. The screen will display the
group you’ve chosen.
6. Press OK; the letter “W” will be displayed in the upper left hand
corner and the Z-Wave light will begin blinking indicating the
remote is waiting to remove your device.
7. Press the button on the device so it communicates with
the remote.
8. When the screen displays SUCCESSFUL you have successfully
removed the Node/Light from the group.
Deleting a Group
This only deletes the specific group. All of the devices are still part
of your home control network.
1. Enter Z-Wave setup mode and highlight GROUP SETUP
2. Press OK; the screen will display ADD
3. Press the right arrow key twice; the screen will display DELETE
4. Press OK; the screen will display SEL DIGIT
5. Press a digit (1-9) for the group you wish to remove the device
from. Press SHIFT and the digit (1-9) if you are removing a
device from groups 10 through 18. The screen will display the
group you’ve chosen.
6. Press OK; the screen will display SUCCESSFUL to indicate the
group has been deleted.
Scenes
A scene is a single device or group of devices that can be preset to
turn on to a previously specified setting (for example, brightness
level). Scenes are ideal for task or mood lighting. You can set up
a maximum of 18 scenes, containing up to 32 devices per scene.