Filter
Top Products
0150-0238A 1-9 Calibur DSR-1000eZ
o Main Menu → Time/Date → Set Date
Date Setup
MM DD YY DAY
12 17 00 SUN
[CANCEL] [OK]
To set the Date:
1. With MM DD YY DAY highlighted, press the Enter button. The
highlighting will move to the row of numbers.
2. Enter the date in Months, Days, Years. Day of the Week will
update automatically. Use the Jog to change the values. Use
the Shuttle to navigate among the three fields.
3. Press the Enter button to confirm the selection.
4. To Save the changes and Exit the menu: Use the Jog to
select [OK], then press the Enter button.
--OR--
5. To Exit the menu without making changes: Use the Jog to
select [CANCEL], then press the Enter button.
1.10 Setting the Alarms
o Main Menu → Alarms
Alarms Menu
Hardwire Alarm : Enable
Teletext Alarm : Disable
Alarm Buzzer : Enable
[CANCEL] [OK]
Use this menu to specify:
• Whether an alarm condition will be activated when the
unit detects a signal on the Alarm In connection.
• Whether a teletext alarm signal (generated by a
multiplexer or other device) will cause the unit to
activate an alarm condition.
• Whether the internal buzzer is activated during an
alarm condition.
Alarms Menu
Hardwire Alarm : Enable
Teletext Alarm : Disable
Alarm Buzzer : Enable
[CANCEL] [OK]
To configure the alarm settings:
1. Use the Shuttle to navigate among the fields.
2. Use the Jog to change the values of the highlighted
fields.
3. To Save the changes and Exit the menu: Use the
Jog to select [OK], then press the Enter button.
--OR--
4. To Exit the menu without making changes: Use the
Jog to select [CANCEL], then press the Enter button.