Filter
Top Products
0150-0238A 4-3 Calibur DSR-1000eZ
This teletext alarm detecting feature of the DSR-1000eZ is compatible with the following styles of
Multiplexers:
• Kalatel
• Philips
• Robot
• Pelco
• Sanyo
• Philips REO
• ATV
• ATV QSP
• Vista VLM
• QSI 1700
• Diebold
Connecting to Dedicated Micros (DM)
When connecting to a Dedicated Micros multiplexer:
• It is necessary to connect the alarm output of the Mux to the alarm input of the DSR-1000eZ (as
you would do when connecting the alarm input on standard time-lapse VCR).
• It is necessary to configure the Main Menu → Alarms → Hardwire Alarm as Enabled.
• It is necessary to configure the Main Menu → Alarms → Teletext Alarm as Disable.
Alarm Menu
Hardwire Alarm : Enable
Teletext Alarm : Disable
Alarm Buzzer : Enable
[CANCEL] [OK]
To configure the alarm settings:
1. Use the Shuttle to navigate among the fields.
2. Use the Jog to change the values of the highlighted
fields.
3. To Save the changes and Exit the menu: Use the
Jog to select [OK], then press the Enter button.
--OR--
4. To Exit the menu without making changes: Use the
Jog to select [CANCEL], then press the Enter button.
4.3 Main Menu → Timer Settings
DATE START STOP SPD(pps) QUALITY ON/OFF
31
Sat
Mon-Fri
Sat-Sun
Mon-Sun
--
16:45
07:55
09:56
14:23
02:23
--:--
17:05
08:10
11:05
14:50
03:34
--:--
20
10
60
60
20
--
[OK]
High
Med
Low
High
Med
--
On
Off
On
On
Off
--
This menu allows the user to
program a timed-recorded
event. Use this menu to
specify:
• The date, or days on
which the recording
will occur.
• The start and stop
time.
• The record speed.
• The record quality.
• Whether the event is
enabled.
EDIT Mode Hit "ENTER" To Toggle EDIT Mode