Filter
Top Products
Grandstream Networks, Inc. HT-386 User Manual Page 17 of 34
Firmware 1.0.3.64 Last Updated: 2/2007
CONFIGURATION GUIDE
CONFIGURING HT–386 THROUGH VOICE PROMPT
DHCP MODE
Follow Table 3 with voice menu option 01 to enable HT-386 to use DHCP.
S
TATIC IP MODE
Follow Table 3 with voice menu option 01 to enable HT-386 to use STATIC IP mode, then use option 02,
03, 04 to set up HT-386’s IP, Subnet Mask, Gateway respectively.
TFTP SERVER ADDRESS
Follow Table 3 with voice menu option 06 to configure the IP address of the TFTP server.
F
IRMWARE SERVER IP ADDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C
ONFIGURATION SERVER IP ADDRESS
Select voice menu option 14 to configure the IP address of the configuration server.
U
PGRADE PROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
F
IRMWARE UPGRADE MODE
Select voice menu option 17 to choose firmware upgrade mode among the following three options:
1) always check, 2) check when pre/suffix changes, and 3) never upgrade