Filter
Top Products
Grandstream Networks, Inc. HT-386 User Manual Page 26 of 34
Firmware 1.0.3.64 Last Updated: 2/2007
TABLE 11: HT-386 CALL PROGRESS TONES SETTINGS PAGE DEFINITIONS
Call Progress Tones
Using these settings, user can configure ring or tone frequencies according to
their preference. By default they are set to North American frequencies.
Frequencies should be configured with known values to avoid uncomfortable
high pitch sounds. ON is the period of ringing (“On time” in ‘ms’) while OFF is
the period of silence. In order to set a continuous ring, OFF should be zero.
Otherwise it will ring ON ms and a pause of OFF ms and then repeat the
pattern.
S
AVING THE CONFIGURATION CHANGES
Click the “Update” button in the Configuration page to save the changes to the HT–502 configuration. The
following screen confirms that the changes are saved. Reboot or power cycle the HT–502 to ensure all
changes are made.
F
IGURE 4: SCREENSHOT OF CONFIGURATION UPDATE MODE
R
EBOOTING THE HT–386 FROM REMOTE
The HT–386 can be remotely rebooted by clicking the “Reboot” button at the bottom of the configuration
page. When finished, re-login to the HT–386 after waiting for about 30 seconds.