Filter
Top Products
Grandstream Networks, Inc. HT-386 User Manual Page 18 of 34
Firmware 1.0.3.64 Last Updated: 2/2007
C
ONFIGURING HT-386 WITH WEB BROWSER
The HT–386 has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow users to configure the HT–386 through a Web browser such as
Microsoft’s IE, AOL’s Netscape or Mozilla Firefox installed on Windows or Unix OS. (Macintosh OS does
not included).
Access the Web Configuration Menu
First, get the IP address of the HT-386 through section “Configuration” with menu option 02. Then access
the HT-386’s Web Configuration Menu using the following URLI: http://ATA-IP-Address
where the ATA-
IP-Address is the IP address of the HT-386.
NOTE:
• To type IP address into browser to get the configuration page, please strip out the announced
leading “0” as the browser will parse in octet. e.g.: if the IP address reported: 192.168.001.014,
please type in: 192.168.1.14.
END USER CONFIGURATION
Once the HTTP request is entered and sent from a Web browser, the user will see a log-in screen. There
are two default passwords for the login page:
User Level: Password: Web pages allowed:
End User Level 123 Only Status and Basic Settings
Administrator Level admin Browse all pages
Only an administrator can access the “ADVANCED SETTING” configuration page. Once this HTTP
request is entered and sent from a Web browser, the HT-386 will respond with the following login screen:
FIGURE 3: SCREENSHOT OF CONFIGURATION LOG-IN PAGE